721

721 / Jumbo Stand -2 sections721 / Jumbo Stand -2 sections

721 / Jumbo Stand 2-sections w/ Braked Wheel

1 riser, 2 sections

Leg: 30 x 30mm

Aluminum legs with chrome steel column

Dia. 70mm; 60mm

The Kupo Jumbo Stand, made from chrome plated steel, is specifically designed to satisfy the industry’s requirement for extra heavy loads with the ultimate of safety in mind. The Kupo Jumbo Stand can support a load capacity up to 70kg (154lbs) and delivers a maximum working height of 6.1m (20') when fully extended. Features Kupo's direct drive gear mechanism and auto-locking instead of pullies and cables.

Features:

1. Large size T-handle on each riser is ergonomically design for maximum torque.

2. 28mm (1-1/8”) junior receiver with 3 eyelets for wind bracing kit.

3. Dual handle equipped on bottom spider casting for easily folding the base.

4. Leg brace is made of rectangular steel tubing for maximum stability and safety.

5. Auto self-locking device prevents unintentional and uncontrolled lowering of the load.

6. Industry 6” (152mm) braked caster included makes stand moveable in the studio or on location.

7. Assembled by nuts and bolts for easier maintenance and tightness adjustable instead of fixed rivet.

 
Specification

 

Closed Length
 
127.5m
50.2"

Maximum Height
 
172cm
67.7”

Minimum Operating Height
 
108m
42.52"

Weight
 
31.55kg
63.1lbs

Footprint Diameter
 
120cm
47.2”

Maximum Load
 
100kg
220lbs

Stand Top
 
UV
 

Suggested Caster
 
KC-160S
 

 
 
 

Features

28mm ( 1-1/8”) junior receiver with 3 side hole for wind bracing kit.
 
 
756 / Jumbo Stand with Braked Wheel
Large size T-handle on each riser is ergonomically design for maximum torque.
 
756 / Jumbo Stand with Braked Wheel
Auto self-locking device prevents unintentional and uncontrolled lowering of the load.
 

756 / Jumbo Stand with Braked Wheel

The detachable ratcheted crank handle prevents damage and reduces protrusions during transportation or storage.
 
756 / Jumbo Stand with Braked Wheel
 
Dual handle equipped on bottom spider casting for easily folding the base.
 
 
756 / Jumbo Stand with Braked Wheel

 

Industry 6” (152mm) braked caster included makes stand moveable in
the studio or on location.
 
756 / Jumbo Stand with Braked Wheel
Leg brace is made of rectangular steel tubing (30x30mm) for maximum stability and safety.
 
756 / Jumbo Stand with Braked Wheel
 
Extension limit marking on each section
 
 
756 / Jumbo Stand with Braked Wheel

 

RS-RR3807 / Rope Ratchet Tie Down
The rope is braided by polyester which is 3/8” (9.5mm) in diameter and 23’ (7M) in length.
756 / Jumbo Stand with Braked Wheel
 
 
756 / Jumbo Stand with Braked Wheel
 
 
 
 
Dia.6mm x 10M nylon rope with stainless spring hook are included for attaching to the eyelets of stand to tether the top of stand to the ground
(set of 3).
 

 

 
 
 
 

756 / Jumbo Stand with Braked Wheel