483SH / Short 3 SCT Wind-up Stand

483SH / Short 3 SCT Wind-up Stand

3 sections. Dia.: 55mm, 45mm, 38mm Leg Dia.: 30mm

2 risers extend simultaneously at one elevation

of 4.4cm per handle turn.

Safety cable ensures simultaneous retrieval of all sections.

Chrome plated steel stand w/ geared column.

With 1 leveling leg



Closed Length

Maximum Height

Minimum Operating Height


Footprint Diameter

Maximum Load

Stand Top

Suggested Caster



LOCK POSTION The safety pin will insert automatically into the hole in the tube when the wind-up engages.
Wind up Stands Features
The stand top is mounted by a steel bolt through the top tube that insures sturdy and solid assembly.
Wind up Stands Features
UNLOCK POSITION The inside spring will bring the safety pin back.

Wind up Stands Features

The crank handle folds back for travel. It also can be placed in between tripod legs to prevent the risers from falling accidentally if the lock is unexpectedly disengaged.
Wind up Stands Features
The tension of the brake shoe can be adjusted with an Allen wrench.
Wind up Stands Features


Velcro is supplied for better cable management.
Wind up Stands Features
Top section tube can be adjusted by stepping on the foot step.
Wind up Stands Features
By using the leveling leg the stand can be quickly leveled on uneven terrain.
Wind up Stands Features
Bright color warning sticker for safety operation.

Wind up Stands Features

Casters are optional for easily moving the stand. The stand foot is rugged zinc-casting. Dia.: 100mm with brakeand M10 attachment. There are three in a set. (KC-100).
Wind up Stands Features
483-BP Base Plate Optional accessory to be used when the stand has to be secured to the floor for safety reasons. Compatible with stand models: 481, 482, 483T and 470. (set of three)
Wind up Stands Features


Wind up Stands Features

Product Video

Kupo wind-up stands are constructed by chrome plated steel with geared column that enable a single operator to raise and lower heavy loads safely with just turn of a handle. Both risers extend simulataneously at one elevation of 4.4cm by per handle turn. The unique automatic self-locking mechanism is equipped to prevent the light stand from dropping unexpectedly making the operation safer.